Wilder Seminar - Creating Winter Whitewash

Adam Wilder demonstrated how to create realistic winter whitewash during the seminar in September of 2015. Don't miss the video of one of Adam's sessions where he demonstrates creating rust effects.

Monday, 30 November -0001
Wilder Seminar - Creating Winter Whitewash - The glossy wet areas were achieved with Wilder Nitroline Murky Water.
The glossy wet areas were achieved with Wilder Nitroline Murky Water.
Wilder Seminar - Creating Winter Whitewash - Finally Adam used some Wilder Nitroline Grey Dirt Spatter to speckle on some dirt. He used a piece of paper to protect the top of the sample.
Finally Adam used some Wilder Nitroline Grey Dirt Spatter to speckle on some dirt. He used a piece of paper to protect the top of the sample.
Wilder Seminar - Creating Winter Whitewash - Adam used Wilder Nitroline Murky Water to glaze the snow for a dirty, wet effect and added some wet streaks.
Adam used Wilder Nitroline Murky Water to glaze the snow for a dirty, wet effect and added some wet streaks.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - Adam then used Wilder Textured Snow to add a bit of the white stuff to the bottom edge.
Adam then used Wilder Textured Snow to add a bit of the white stuff to the bottom edge.
Wilder Seminar - Creating Winter Whitewash - After this photo was taken and the mud effect was dry, Adam worked the mud effect with a little enamel thinner to blend, stipple and build up texture.
After this photo was taken and the mud effect was dry, Adam worked the mud effect with a little enamel thinner to blend, stipple and build up texture.
Wilder Seminar - Creating Winter Whitewash - Adam used the Wilder Nitroline Light Dry Mud Effect to create some stains.
Adam used the Wilder Nitroline Light Dry Mud Effect to create some stains.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - The sample was sealed with Tamiya X-22 Clear (or any gloss varnish). This is so the enamel effects will stick properly. Then Adam used Wilder Nitroline Dark Blue Filter to cover the entire surface with even strokes, all in the same direction - top to bottom. Adam used two coats, but you can use more or less until you reach your desired effect.
The sample was sealed with Tamiya X-22 Clear (or any gloss varnish). This is so the enamel effects will stick properly. Then Adam used Wilder Nitroline Dark Blue Filter to cover the entire surface with even strokes, all in the same direction - top to bottom. Adam used two coats, but you can use more or less until you reach your desired effect.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - Second round of chipping with water - tap rather then rub while chipping otherwise you can wipe away details like streaks and scratches.
Second round of chipping with water - tap rather then rub while chipping otherwise you can wipe away details like streaks and scratches.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - Add streaks and drips of white paint using a brush.
Add streaks and drips of white paint using a brush.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - Unevenly spraying a second coat of XF-2 Flat White thinned with water.
Unevenly spraying a second coat of XF-2 Flat White thinned with water.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - Chipping with water - try to create contrast.
Chipping with water - try to create contrast.
Wilder Seminar - Creating Winter Whitewash
Wilder Seminar - Creating Winter Whitewash - The sample styrene card had a green base coat. Chipping the whitewash can be achieved with the hairspray method, but in this case Adam just sealed it with Tamiya XF-86 Flat Clear. Then he sprayed XF-2 Flat White (thinned with water) unevenly all over the surface.
The sample styrene card had a green base coat. Chipping the whitewash can be achieved with the hairspray method, but in this case Adam just sealed it with Tamiya XF-86 Flat Clear. Then he sprayed XF-2 Flat White (thinned with water) unevenly all over the surface.
  • An excellent local product
› ‹
  • 1
  • 2

Video Tutorials

Galleries

Site Search