June 2017MiniArt 1/35 Bottle and Crate Accessory Kits
September 2016Alpine 1/35 3rd Armored Division Corporal and Staff Sergeant
SeptemberPolar Lights 1:9 Alien - Executive Officer Kane Resin FigureJulyBronco 1:35 British Paratrooper Sets A and BFebruaryAlpine 1:35 Waffen SS Panzer CommandersSeptemberMeng 1:35 Modern U.S. Military Individual Load-Carrying Equipment SPS-015
These accessory kits from MiniArt contain multiple sprues of transparent bottles, green and brown, parts to make wooden crates and decals to use as labels for the bottles and crates.
Alpine continues to release excellent 1/35 scale WWII subjects. This time the focus is on the US 3rd Armored Division. Each figure comes with a choice of two heads.
Alpine 35217 1/35 US 3rd Armored Division Corporal
Alpine 35218 1/35 US 3rd Armored Division Staff Sergeant
Polar Lights has released a stunningly detailed resin kit of Executive Officer Kane from the 1979 movie Alien. The environmental protection suit is the focus of this resin model kit. The resin parts capture every detail down to the quilted pattern of the suit. The kit focuses on the tension-filled moment where Kane first encountered the bizarre ALIEN life form in its embryonic egg. Everything rests on a detailed base. Decals and illustrated instruction sheet are included to finish the model.
Highly detailed resin parts capture superb detail (No seam lines, no bubbles, clean joints) Engineered to allow realistic lighting effects Captures iconic moment in the film Crystal clear plastic parts Clear resin egg Detailed facehugger inside Decal sheet Instructions
Scale: 1/9 Height: nearly 6" (152.4mm) Base: 7" x 10" (177.8mm x 254mm)
Bronco has released two new sets of British Paratroopers 'In Action' in 1/35 scale. They combine figures with equipment like the trolley, the Welbike and container, along with a bicycle. The kits come with decals and photo etch elements.
Alpine's 1:35 figures stand approximately at 48-52mm from the top of the head to the bottom of the heel. Each figure comes with two different heads sculpts wearing different headwear. The above is set 35173, below set 35172.
Below is Alpine set 35187.
Below is Alpine set 35188. You can purchase both the 35187 and 35188 figures as a two pack in set 35189.
After studying a lot of reference materials, MENG has released this 1:35 scale set of Modern U.S. Military Individual Load-Carrying Equipment, which is indispensable for soldiers in the modern combat theatre. The load each soldier bears directly affects their endurance and ability of fight so like all modern militarizes, the U.S. has conducted a lot of research and issues very specific equipment to their troops.
When building modern military figures or war dioramas, you probably always feel that there is something missing when you compare your work to the reference materials. MENG's SPS-015 kit will help you fix that. It consists of two sprues and is made up of field packs, helmets, one water bag, water canteens, medikits, moisture-proof pads and protective cases. You can use this equipment to enhance your armoured fighting vehicles, figures and dioramas.
Over the next month or two we should see these exciting models hit the shelves at Hornet Hobbies. Start planning your next project, or make room to build your collection.
M10 Tank Destroyer Mid Production (1/35) Item No: 35350
10% off on pre-orders of this excellent new release from Tamiya!
This is a model of the famed M10 Tank Destroyer, a subject also covered in the 1/48 scale Military Miniature series. This largely newly-tooled model (only machine gun and clear parts are taken over from existing models) gives it the glorious detail of the larger 1/35 scale. The astonishing success of German armor tactics in 1940 prompted U.S. forces to adopt a doctrine requiring dedicated new tank destroyers to counter them. After going down a few different design routes at the start of the process, they eventually hit upon the highly successful M10 design with well-sloped (if rather thin, to keep the vehicle light and maneuverable) armor plate, and the highly capable 3-inch (76.2mm) gun. Over 4,900 were produced, and took part in Operation Torch (the invasion of N. Africa), as well as fighting in Italy and the advance upon Germany that would bring the exhausting conflict to a close.
Tamiya Panther Aufs.D (1/35) Item No: 35345
Arriving in July, this all-new 1/35 scale model recreates with stunning detail the Panther Ausf.D, the first production version of the famed German tank, which appeared in the Battle of Kursk. Tamiya designers traveled to Breda in the Netherlands to pore over the final remaining Panther Ausf.D, and the result is this breathtakingly accurate depiction of the tank, complete with recreations of the 7.5cm gun and sloped armor. Comes with a commander torso figure, plus a full-body crewman figure, as well as 3 marking options depicting Battle of Kursk Panthers.
Tamiya Mosquito FB Mk. VI (1/32) Item No: 900-60326
Arriving in July, Tamiya has expanded its line of 1/32 scale, hyper detailed plastic model assembly kits with the Mosquito FB Mk. VI. This is a 1/32 scale plastic model assembly kit. At 515mm in wingspan, this masterpiece captures the elegant twin-engine form of the FB Mk.VI with astounding detail. This newly-tooled model was researched using real Mosquitoes. The cockpit interior is realistically depicted, right down to details, such as the pilot's seat cushion.
HK Models De Havilland Mosquito Mk. IV (1/32) Item No: HK-01E15
July brings an embarrassment of Mossie riches. There will be two 1/32 scale Mosquitoes to collect and build. The HK Models kit promises a number of exciting features: Brand new state of the art tooling. Wingspan 515mm, length 389mm. Stunning single piece wing. Optional bulged bomb bay & 'Cookie' bomb. Decals for three aircraft by Cartograf: * DK296 Soviet aircraft (standard bomb bay) * DZ637 as P3-C (bulged bomb bay) * DZ637 as AZ-X (bulged bomb bay)
The HK Models kit offers very impressive options and extras:
Dragon 1:35 Tiger I Early Production (Michael Wittmann), Eastern Front 1944Dragon Item No: DRA 6730
Dragon Smart Kit - January 2015 release. Full set of Michael Wittmann's crew (5 figures) included in the first production run as BONUS!
Please pre-order to assure that you get a copy upon its initial release. We had some sell outs recently on popular models. This one will disappear fast.
Dragon has created a magnificent representation of Wittmann’s Tiger I (turret number 'S04') with 88 kill marks on barrel. Dragon’s kit appropriately portrays an Early-Production variant, and it forms the important and much-anticipated last piece of Dragon’s exemplary Tiger I family.
This brand new kit stems from thorough research and is accurately designed to represent Wittmann's 'S04' mount. To ensure the absolute highest levels of quality, the majority of components in this special release, like turret, upper hull, engine deck, rear panel, road wheels, spare tracks and etc, are newly tooled and engineered to achieve the engineering level of a Smart Kit, and to provide the unique appearance of this famous Tiger.
Meng 1:35 French Main Battle Tank AMX-30B2Meng Item No: TS-013
Tamiya 1:35 German Jagdpanzer IV/70(V) LangTamiya Item No: 35340
Tamiya Metal Gun Barrel Set for 1:35 German Jagdpanzer IV/70(V) LangTamiya Item No: 12660
Tamiya 1:24 Subaru BRZ Street-CustomTamiya Item No: 24336
Tamiya Warbird Collection No.86 - 1:72 Lockheed Martin® F-16®CJ [BLOCK50] Fighting FalconTamiya Item No: 60786